Concrete Sealers
947 Matte Clear Sealer and 948 Semi-Gloss Clear Sealer
Olympic Clear Sealers are water-borne acrylic coatings designed to protect and preserve the appearance of natural stone and rock, pavers, exposed aggregate, and brick surfaces. Formulated to give excellent protection from salt exposure.

Note: Not recommended for stamped concrete or wood.

  • May be applied to slightly damp surfaces
  • Use of water features
  • May be recoated in 4 hours (minimum)
  • Protects against oil, stains, salt, and weather
  • Only use matte finish for foot traffic area
  • Low VOC, less than 100 g/l
  • No solvent fumes
  • Water clean-up
  • Applies milky-white in appearance - dries clear
  • Requires two coats on most applications

Practical Coverage: Apply at 275 - 450 sq. ft. per gallon
Coverage and spread rate will vary depending on the porosity and texture of the substrate.



Applies easily - roll, brush or spray   Salt protection for natural stone and rock

©2019 Kelley Technical Coatings. All rights reserved.
1445 South 15th Street    P.O. Box 3726
Louisville, Kentucky 40201-3726
502.636.2561    800.458.2842   Fax 502.635.5170